Function
Description
Memory Recall
Recalls the preset image settings if operating in any
one of the factory set display modes (see Table 1 on
page 9)
Adjusts the amount of curvature on the vertical edges
Side Pincushion
Trapezoid
Equalizes the length of the top and bottom edges
-
+
Effect of Control
Control buttons
,
and
have dual functions,
,
and
. To make adjustments to the secondary controls press
shift button
. The LED indicator will light up to show secondary controls are active. To revert back to primary controls (
) press shift button again and the LED indicator will go off.
To adjust secondary controls :
1.
Press shift button
to select secondary controls.
2.
Press control button you wish to adjust.
3.
Press - and + buttons to adjust the image.
Secondary controls
8
