IBM BladeCenter JS20, Инструкция по установке и эксплуатации

Страница: 86 / 132

Table 1. Abbreviated list of firmware error codes (continued)
Error code Failing device or problem found Suggested action
25C0 xx yy DIMM failure:
where xx and yy are:
xx Description
01 DIMM4 missing
02 DIMM3 unsupported and
DIMM4 missing
04 DIMM3 failed and DIMM4
missing
10 DIMM3 missing
12 DIMM3 unsupported
14 DIMM3 failed
20 DIMM3 missing and DIMM4
unsupported
21 DIMM4 unsupported
22 DIMM3 and DIMM4
unsupported
24 DIMM3 failed and DIMM4
unsupported
40 DIMM3 missing and DIMM4
failed
41 DIMM4 failed
42 DIMM4 failed and DIMM3
unsupported
44 DIMM3 and DIMM4 failed
88 DIMM3 and DIMM4
mismatch
Note: For additional information about DIMMs, see
“Installing memory modules” on page 24.
1. Make sure that all the DIMMs in the blade server are
supported. Replace all the unsupported DIMMs.
2. Make sure that the DIMMs are installed in matched
pairs. If the DIMMs are not installed in matched pairs,
reinstall them in matched pairs.
3. Make sure that the DIMMs are correctly seated. If
necessary, reseat the DIMMs.
4. Restart the blade server.
5. Remove and reinstall the DIMMs one at a time until
the failing DIMM is isolated. Replace the defective
DIMM.
If the problem remains, replace the system-board
assembly. Contact a service support representative for
assistance.
74
BladeCenter JS20 Type 8842: Installation and User’s Guide