IBM AS/400e 270, Обновление

Страница: 7 / 26

Upgrading Twinaxial Console to Operations Console
These instructions contain steps on how to upgrade your Twinaxial Console to an
Operations Console .
If you are going to connect a remote control panel cable, ensure that you have the
cable available before you begin this upgrade.
Install the Operations Console prerequisites on the personal computer (PC). See the
Operations Console Setup , SC41-5508-01, book for prerequisites, located on the
Installation and Service Library CD , SK3T-4028-02.
You are changing the console device, the AS/400 system value QAUTOCFG must
be set to ON . Use the following to verify or set this system value on the AS/400:
__ 1. Enter WRKSYSVAL QAUTOCFG on an OS/400 command line and press
Enter.
__ 2. Select Change option from the Work with System Values display and press
Enter.
__ 3. Select option 1=ON from the Change System Value display and press Enter.
__ 4. The Work with System Values display appears. Press F3 once to return to
tthe AS/400 Main Menu .
Before you begin
This feature is customer-installable. You can elect not to do this installation
yourself. Contact IBM or an Authorized Dealer to make arrangements for them to
perform the feature installation for a fee.
You need to allow additional time to complete your jobs, back up your system,
initial program load (IPL) your system, and verify your hardware configuration.
When you use these instructions, you may do some of the following:
v
Remove the system unit covers.
v
Install your new hardware.
v
Install covers.
v
IPL your operating system.
v
Verify your new hardware configuration.
Some of the pictures in these instructions may not look exactly like the system unit
that you have. However, the steps to perform the task are the same.
__ 1. Ensure that you have a current backup of your system (including operating
systems, licensed programs, and data).
__ 2. Ensure that you take a few minutes to become familiar with these
instructions.
__ 3.
If there are incorrect, missing or visibly damaged parts, contact one of the
following:
v
Your authorized dealer
v
IBM Rochester Manufacturing Automated Information Line (R-MAIL)
– 1-800-300-8751 (United States)
© Copyright IBM Corp. 2000
1