IBM Aptiva, Руководство по техническому обслуживанию аппаратной части, Страница: 37 / 282

1-20
1. From the main menu, highlight the option Load Default Settings then press
Enter. A dialog box appears confirming if you want to load the default
settings.
2. Use the left-arrow key to select Yes, then press Enter.
3. Press Esc to exit Setup.
A dialog box appears confirming if you want to save the CMOS settings (in
this case, the default settings that you reloaded).
4. Use the left-arrow key to select Yes, then press Enter to save the changes
in CMOS.
You must load the Setup default settings In the following instances:
−
When you replace the system battery
−
When you customize your system configuration settings and some
resource assignments conflict causing the computer to hang
Aborting Setting Changes
There may be times when you have made changes in the Setup parameter
settings but decided to discard the changes. The option Abort Settings
Change allows you to do this without exiting Setup.
To abort the changes that you have made, follow these steps:
1. Return to the Setup main menu.
2. Highlight the Abort Settings Change option then press Enter.
BIOS then clear up all the changes that you made and reverts the parameters
to their saved settings. The saved settings are those that you see when you
entered Setup, before you made the changes.
Exiting Setup
When you complete your changes or finish viewing information, return to the
main menu. From this location, you can exit Setup and save your changes or
exit without saving your changes.
Follow these steps to exit Setup:
1. From the main menu, press the Esc key.
2. The Exit Setup dialog box appears. If you have made changes in the
parameter settings, it will contain an option for saving your changes.
- If you would like to save your changes, press the left-arrow key to select
the option Yes then press Enter to save your changes and exit Setup.