IBM Aptiva 2159, Техническое обслуживание оборудования

Страница: 73 / 214

Table 2-1 (Page 12 of 25). POST and Diagnostics Index for
Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Processor speed seems slower. “Memory” on page 2-38.
Cache memory
System board
Program loads from the hard
disk with a known-good CD in
the CD-ROM drive or diagnostics
diskette in the first 3.5-inch
diskette drive (and CD-ROM
drive or diskette drive is enabled
in the Setup Utility). “Factory-Installed Drive Devices” on
page 2-47.
CD-ROM Drive
Diskette Drive
Access Station host card.
Access Station client card
System Board
Power Supply
Program or File
Not Found
Press Any Key
Diagnostics cannot find the
USER(N).COM file.
Diagnostic CD or diskette
CD-ROM Drive or Diskette Drive Access
Station host card
Access Station client card
Access Station cable
System Board
Program Too Big To Fit In
Memory.
Too many Terminate and Stay
Resident programs in memory. Reboot the system from the Diagnostic CD.
QAPlus/PRO Cannot Be Re-run
Because Of Error In Relocating
Program.
Diagnostics failed to relocate the
Diagnostics Test programs so
the memory space it resides in
was not tested. Diagnostic CD
Memory SIMM
System Board
RAM Memory Error in Block n.
Bad bits n.
Memory error. Memory SIMM
System Board
RAM Test Failed.
Memory error. Memory SIMM
System Board
Read error on cylinder n.
Hard disk drive format error. Hard Disk Drive
System Board
Check Procedures
2-21
All manuals and user guides at all-guides.com