IBM AMD Opteron LS20 Type 8850, Инструкция по установке и эксплуатации

Страница: 48 / 68

– Baseboard Management Controller (BMC) Settings
Select this choice to enable or disable the Reboot on System NMI option on
the menu. If you enable this option, the blade server will automatically restart
60 seconds after the service processor issues a nonmaskable interrupt (NMI)
to the blade server. You can also select this choice to enable or disable and
set the time-outs for the loader watchdog timers and view BMC version
information.
- BMC Network Configuration
Select this choice to set the network addresses of the BMC.
- BMC System Event Log
Select this choice to view and clear BMC event log entries.
v Save Settings
Select this choice to save the changes you have made in the settings.
v Restore Settings
Select this choice to cancel the changes you have made in the settings and
restore the previous settings.
v
Load Default Settings
Select this choice to cancel the changes you have made in the settings and
restore the factory settings.
v
Exit Setup
Select this choice to exit from the Configuration/Setup Utility program. If you have
not saved the changes you have made in the settings, you are asked whether
you want to save the changes or exit without saving them.
Using passwords
From the System Security choice, you can set, change, and delete a power-on
password.
If you set a power-on password, you must type the power-on password to complete
the system startup and to have access to the full Configuration/Setup Utility menu.
You can use any combination of up to seven characters (A–Z, a–z, and 0–9) for the
password. Keep a record of your password in a secure place.
If you forget the power-on password, you can regain access to the blade server by
removing the blade server battery and then reinstalling it. (See the Problem
Determination and Service Guide for your blade server for more information about
replacing the battery.)
36
AMD Opteron LS20 Type 8850 for IBM BladeCenter: Installation and User’s Guide