IBM Ambra Achiever 5000 Скачать руководство пользователя | Manualshive

Страница: 40 / 78

background image

Installation prerequisites (SSR task)

Customers must fill the “Installation worksheet” on page 45 for the SSR to start installation. This

process must be done by using the Technical Delivery Assessment (TDA) process. The installation

worksheet describes the IP addresses that the SSR sets on each node.
The SSR might need the following things for the ESS 5000 installation:
• Ethernet cable
• USB-C (or USBA) to Ethernet dongle (This connector is required if your laptop does not have an Ethernet

port.)

• Serial cable for POWER9

™

servers

• USB-C (or USBA) to Serial dongle
If available, power on the high-speed switch(es) and connect the Ethernet or InfiniBand cables to the

adapters that are installed within the POWER9 servers. This step must be done before the customer can

deploy the cluster but is not required for code 20. The low-speed Ethernet cables must be run to the

proper locations on both switch and server sides before code 20 can begin (If the system came racked

with the management switch this step is done in manufacturing).
The goal is to install the hardware and perform a full code 20. After performing the code 20, SSR should

provide the following information to the customer or LBS. Fill this information in the “Installation

worksheet” on page 45.
• ESS version
• Installation notes

Installation steps (SSR task)

This section is a high-level overview of the tasks that an IBM service support representative (SSR)

performs to complete code 20.

SSR objectives

1. Log in by using the SSR ID (esserv1) and run the specified

essutils

command options on each

server in the following order:

a. One or more ESS 5000 building blocks

b. Two or more ESS 5000 protocol nodes

c. An ESS 5000 management server (EMS)

Note: This is the order to be followed for a new customer. If you are adding a building block or

protocol node(s) the sequence is adjusted slightly.

2. Set the root password to

ibmesscluster

from within

essutils

. This password is set to expire from

manufacturing but must be set to run the

essutils

SSR task options.

3. Perform all specified hardware validation options. You will run a subset of the commands for the EMS

and protocol nodes, if available. The I/O servers have more checks because they are connected via

SAS to the storage enclosures.

4. Set HMC1 and OS management IP address. On the EMS, you also need to set the FSP interface on the

OS. For more information about the interface and the IP address, see “Installation worksheet” on page

5. Perform ping test from the EMS to the I/O servers and the protocol nodes. This ping test is performed

to check whether connections to the management (C11-T1) and FSP interfaces (HMC1) are working

properly.

6. Document issues on the customer worksheet for use by the customer or LBS.

28 IBM Elastic Storage System 5000: Hardware Guide

«
...
38
39
40
41
42
...
»

Содержание Ambra Achiever 5000















































































Отзывы:

Нет отзывов

Похожие инструкции для Ambra Achiever 5000

Бренд: EchoStar Страницы: 15

RD232-H-RS232-925M

Бренд: Wenshing Страницы: 18

premium-line CMO 2-01

Бренд: axing Страницы: 4

Бренд: RACOM Страницы: 189

PlantLinc PLR5000

Бренд: Data-Linc Group Страницы: 31

Бренд: Zoom Страницы: 2

Бренд: Zoom Страницы: 2

Бренд: GDI COMMUNICATIONS Страницы: 21

Бренд: GDI Страницы: 21

Бренд: Four-Faith Страницы: 22

Бренд: Rosewill Страницы: 15

Бренд: Kinpo Страницы: 7

Бренд: NETGEAR Страницы: 17

FRITZ!Box 6660 Cable

Бренд: Fritz! Страницы: 281

EZ Connect SMC8014

Бренд: SMC Networks Страницы: 34

Бренд: Hughes Network Systems Страницы: 53

Бренд: Hughes Network Systems Страницы: 154

Бренд: M-Life Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды