IBM Accesser F5100 3401-A02, Руководство пользователя

Страница: 25 / 42

3. Adjust both the short and long brackets to the proper distance so that the rail can fit snugly into the
rack.
4.
Align the front tabs of the outer rail with the holes in the rack post, as shown in the following figure.
5. Push the outer rail into the rack post so that the tabs go through the rack post and hold the rail in
place, as shown in the following figure.
6. Attach the back of the left outer rail to the rear rack post through a similar process, as shown in the
following figure.
7. Repeat these steps for the right outer rail.
The final assembly of both outer rails is shown in the following figure.
Figure 6. Aligning the outer rails with holes in rack post
Figure 7. Push outer rail into rack post
Figure 8. Attach back of outer rail
Chapter 3. Install the appliance into a rack
9