IBM Accesser 4105, Руководство по эксплуатации прибора

Страница: 35 / 66

Requirements
Cabling
Table 55. Cabling requirements for the appliance
Cable Type and Usage
Power Cords Use only the power cords supplied with the appliance. Do not use another type of cord.
Do not use extension cords. If additional power cords are required, contact IBM Support.
1000BASE-T Copper
Cables Use high quality Category 5e or 5 (CAT5e, CAT5) copper cables.
Optical Fiber Cables Use Intel based enhanced small form-factor pluggable (SFP+) transceivers only. Both
short reach (SFP+ SR) and long reach (SFP+ LR) optics are supported. Optical fiber cable
specifications depend on the SFP+ module used. For more detail, refer to Intel
documentation on Modules and Cables.
Direct Attach Copper
Cables Any SFP+ passive or active direct attach copper cable compliant with the SFF-8431 v4.1
and SFF-8472 v10.4 specifications is supported. For more details, refer to Intel
documentation on Modules and Cables.
Chapter 3. Specifications and requirements
17