IBM Accesser 4105, Руководство по эксплуатации прибора

Страница: 23 / 66

Chapter 3. Specifications and requirements
Appliance specifications
v Dual Intel Xeon E5-2690v3 processors
v 8 x 16GB PC4-17000 2133MHz ECC Registered RAM modules
v 1U server with 8 front-accessible 2.5" drive bays
v 6 40mm internal fans
v 2 hot-swappable 750W PSUs in 1+1 configuration
v 2 OS drives - Intel SSDC2BB120G4
v Onboard IPMI
v 2 onboard 1 Gbps network ports
v 1 onboard 1 Gbps dedicated IPMI network port
Note: Additional Networking Option
The appliance can support another optional networking card to provide additional Ethernet ports. This
port is found to the right of center on the rear of the appliance, as shown in the following figure.
General (dimensions, temperature, humidity, weight and power
measurements)
The tables that follow show the general specifications for the appliance listed.
Table 2. General specifications (Slicestor 2584)
S2584 Specification
Operating Temperature °C (°F) 5 to 35 degrees °C (41-95 degrees °F)
Non - operating temperature °C (°F) -40 to 70 degrees °C (-40-158 °F)
Operating humidity 20-80%
Non - operating humidity 5-90%
Dimensions without front bezel (W x D x H) 17.625 x 36.730 x 8.660 (in)
44.7675 x 93.2942 x 21.9964 (cm)
Dimensions with front bezel (W x D x H) 19.000 x 36.730 x 8.660 (in)
48.26 x 93.2942 x 21.9964 (cm)
Weight 282 (lbs)
127.913 (kg)
Rail/extended 26/34.5 (in)
66.04/87.63 (cm)
Power cord C19/C20 (connector) .5 m (length)
Figure 1. Rear of the appliance with the card slot highlighted
© Copyright IBM Corp. 2016, 2019
5