IBM 9514B03 - 9514 - 14.1" LCD Monitor, Руководство по установке

Страница: 38 / 58

Function Explanation
STANDBY: Set the number of minutes without any input from
keyboard, mouse, brightness ( ) buttons, or
contrast ( ) buttons before the monitor enters
power-saving mode. Specify
OFF
if you do not use
this function. See “Saving Power with Standby
Mode” on page 29 for more details.
You can set the following values: OFF, 5, 10, ..., 60,
DPMS.
EXPANSION: To display a screen with resolution less than 1024
×
768 (the resolution of the monitor), select the size
you want by specifying one of the following:
ON: Displays a full screen. This is the normal
selection.
OFF: Displays the screen specified by your PC.
USER: Enables you to set the screen size by
specifying H-size and V-size in
manual-adjust menu (see “The
Manual-Adjust Menu” on page 30).
The following settings can be set and stored for each screen resolution.
AUTO SETUP: To start auto setup, select this item and push one of
the contrast (
) buttons.
(“START”
→
“COMPLETED” are displayed in
sequence until auto setup is complete.)
CONTRAST: Adjust contrast. This parameter works the same as
the contrast adjustment described in “Adjusting the
Brightness and Contrast” on page 12. You can set
values from 0 to 30.
BRIGHT: Adjust brightness. This parameter works the same
as the brightness adjustment described in “Adjusting
the Brightness and Contrast” on page 12. You can
set values from 0 to 30.
2
Push one of the brightness control ( ) buttons to select an item to set.
If you push and hold one of the brightness control buttons, the
manual-adjust menu (see page 30) is displayed.
3
Push one of the contrast ( ) buttons to change the function or value
for that item.
28