IBM 9514B03 - 9514 - 14.1" LCD Monitor, Руководство по установке

Страница: 26 / 58

Auto Setup for PC-DOS
To perform auto setup for PC-DOS or PC-DOS/V:
1
Start with the monitor and the PC turned off.
2
Turn on the monitor first; then turn on the PC.
Note: The screen remains blue until the computer is ready. This is not
a problem.
If an error message is displayed
If the message “UNSUPPORTED VIDEO” is displayed, or if nothing
is displayed, check that:
The video interface cable is connected properly.
The correct video adapter card (see page 40) for your PC is
installed.
The correct supported display mode is selected for your PC.
3
Insert the diskette labeled “Setup Option Diskette (for DOS/Windows)”
into the diskette drive.
Note: The application programs included in the setup option diskettes
are used only for displaying the color-bar patterns. They are not
for changing the display driver.
4
Wait about 15 minutes until the monitor warms up.
Note: If the monitor is in standby mode, it may automatically turn off
while you are waiting for it to warm up. Exit standby mode
(refer to “The Setup Main Menu” on page 27).
5
Display the command prompt screen of the PC-DOS full-screen display
by pressing Enter while pressing Alt.
If Windows is installed, open the PC-DOS prompt from the Program
Manager to display the PC-DOS full-screen.
If OS/2 is installed, open the PC-DOS full-screen display from the
command prompt of OS/2.
If only PC-DOS is installed, the command prompt is displayed when
the system is started.
6
If you are using PC-DOS/V, change to U.S. mode by typing
CHEV US
and pressing Enter at the command prompt.
7
At the command prompt, type
A:
and press Enter.
16