IBM 9123710 - eServer OpenPower 710 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 70

IBM 9123710 - eServer OpenPower 710 Скачать руководство пользователя страница 32

22

IBM eServer OpenPower 710 Technical Overview and Introduction

2.5.1 PCI-X slots and adapter

PCI-X, where the X stands for extended, is an enhanced PCI bus, delivering a theoretical
peak bandwidth of up to 1 GB/sec, running a 64-bit bus at 133 MHz. PCI-X is backward
compatible, so the OpenPower 710 servers can support existing 3.3 volt PCI adapters.

2.5.2 LAN adapters

When an OpenPower 710 server is connected to a local area network (LAN), the internal dual
port 10/100/1000 Mbps RJ-45 Ethernet controller integrated on the system planar can be
used. Except for the VPD module, the integrated dual 10/100/1000 Mbps Ethernet subsystem
is identical to the FC 5706 IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter.

Table 2-2 provides a list of additional LAN adapters available at the time of writing. IBM
supports an installation with Network Installation Manager (NIM) using Ethernet adapters
(CHRP

1

is the platform type).

Table 2-2 Available LAN adapter

2.5.3 SCSI adapters

The OpenPower 710 server has one internal dual port Ultra320 capable SCSI adapter
integrated on the system planar. Unlike the other IBM

Sserver

p5 or OpenPower models,

the OpenPower 710 server uses only one of the available SCSI busses for internal
connection to the four disk drives. The second SCSI bus has an external VHDCI LVD
connector on the rear of the system.

Table 2-3 shows a list of additional SCSI adapters available at the time of writing. All listed
adapters can be used as boot adapters.

Restriction: The integrated PCI-X card slots do not support hot-plug.

1

CHRP stands for Common Hardware Reference Platform, a specification for PowerPC® processor-based systems

that can run multiple operating systems.

Feature
code

Adapter description

Slot priority

Size

Max

1985

IBM 10/100 Mbps Ethernet PCI Adapter II

1, 2, 3

Short

3

1978

IBM Gigabit Ethernet-SX PCI-X Adapter

1, 2, 3

Short

3

1979

IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

1, 2, 3

Short

3

1983

IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X
Adapter

1, 2, 3

Short

3

1984

IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter

1, 2, 3

Short

3

1981

IBM 10 Gigabit Ethernet-SR PCI-X Adapter

a

a. Check with your IBM representative for the latest availability and support using Red Hat
Enterprise Linux AS for POWER Version 4 or later.

1, 2, 3

Short

1

1982

IBM 10 Gigabit Ethernet-LR PCI-X Adapter

a

1, 2, 3

Short

1

Note: It is not possible to add hardware RAID capabilities to the onboard adapter.

«
...
30
31
32
33
34
...
»

Содержание 9123710 - eServer OpenPower 710







































































Отзывы:

Нет отзывов