IBM 86594RY - Netfinity 5000 - 4RY, Руководство по техническому обслуживанию аппаратной части

Страница: 31 / 220

System information:
Select this choice to display
information about the Netfinity 5000,
Changes that you make on other menus might appear on
this summary screen.
Product data:
Select this choice to view system
information such as the machine type and model, the
system serial number, the system board identifier, and the
revision level or issue date of the flash electronically
erasable programmable ROM (EEPROM) and BIOS.
System card data:
Select this choice to view the
system board model, submodel, system serial number,
system board identifier, DASD backplane identifier, and
identifiers for power supply 1 and power supply 2.
PCI routing:
Select this choice to view the interrupt request (IRQ)
settings for PCI adapters and for the Ethernet, SCSI, and
other controllers on the system board. See “PCI bus
control” on page 30 for information about changing the
PCI IRQ settings.
Devices and I/O ports:
Software recognizes ports
from their port assignments. Each port must have a
unique port assignment. The Configuration/Setup Utility
program normally handles this, but you might have special
hardware or software that requires you to change these
assignments.
Note
Serial port A can be shared by the system
management processor and operating system. Serial
port B is used by the operating system only.
Management port C is controlled exclusively by the
system management processor, cannot be used by
the operating system, and cannot be configured using
the Configuration/Setup Utility program. See the
“Advanced System Management Information” section
of this
Server Library for information about configuring
serial ports A and C.
Select the Devices and I/O Ports choice to view or
change the assignments for devices and input/output ports.
Netfinity 5000 - Type 8659
23