IBM 8335-GTG Скачать руководство пользователя страница 21

Страница: 21 / 70

Resolving a hardware problem

Learn how to identify the service action that is needed to resolve a hardware problem.

Procedure

1. If you have not already done so, manually boot the system.
2. Go to “Identifying a service action by using system event logs” on page 21. Then, continue with the

next step.

3. Was a service action identified?

Then

Yes:

Continue with the next step.

No:

Go to step “5” on page 7.

4. Did the service action fix the problem?

Then

Yes:

This ends the procedure.

No:

Go to step “5” on page 7.

5. Go to “Resolving a GPU, PCIe adapter, or device problem” on page 7. Then, continue with the next

step.

6. Was a service action identified?

Then

Yes:

Continue with the next step.

No:

Go to “Collecting diagnostic data” on page 23. Then, go to “Contacting IBM service

and support” on page 24. This ends the procedure.

7. Did the service action fix the problem?

Then

Yes:

This ends the procedure.

No:

Go to “Collecting diagnostic data” on page 23. Then, go to “Contacting IBM service

and support” on page 24. This ends the procedure.

Resolving a GPU, PCIe adapter, or device problem

Learn how to access log files, information to identify types of events, and a list of potential problems and

service actions.

About this task

Procedure

1. Are all of the adapters in the system missing or failed?

Then

Yes:

Replace the system backplane.
• If your system is an 8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX, go

to “8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX locations” on page

25 to identify the physical location and the removal and replacement procedure.

Beginning troubleshooting and problem analysis 7

Содержание 8335-GTG







































































Результаты поиска

Содержание 8335-GTG

Отзывы:

Похожие инструкции для 8335-GTG

Бренды по названию

Популярные бренды

IBM 8335-GTG, Руководство пользователя

Результаты поиска

Содержание 8335-GTG

Отзывы:

Похожие инструкции для 8335-GTG

Бренды по названию

Популярные бренды