IBM 8265 Nways ATM Switch, Руководство пользователя

Страница: 41 / 192

Setting CPSW Passwords
It is necessary to set two levels of CPSW passwords:
Ÿ Administrator password that provides access to all CPSW commands with read-write (configuration)
access (factory default is 8265).
When logged in with the administrator password, you can place the 8265 in Maintenance Mode (see
page 34).
Ÿ User password that provides access to a subset of CPSW commands including most SHOW
commands, PING and TELNET (factory default is a null string).
See the IBM 8265 Command Reference Guide for more information on access to CPSW commands.
Administrator Password:
1. At the console prompt, type the SET DEVICE PASSWORD ADMINISTRATOR command:
à ð
8265ATM
>
set device password administrator
á ñ
Then press Enter.
2. In the next three fields displayed, enter your current password and the new password (up to fifteen
characters) twice as shown below. For security purposes, the values you enter are not displayed on
the screen.
à ð
Enter current administrator password: {old password}
New password:
{new password}
Re-enter password: {new password}
á ñ
Then press Enter. You are prompted when your password is accepted:
à ð
Password changed.
á ñ
3. To save your new password, type the SAVE DEVICE or the SAVE ALL command:
à ð
8265ATM
>
save device
á ñ
Then press Enter.
You will need to enter the new administrator password the next time you log on to the CPSW. Note that
you have only ten seconds to enter a password when the Password prompt is displayed. If you do not
enter a password, a Timeout message is displayed. To re-display the Password prompt and start again,
press Enter.
Chapter 3. Configuring Basic Parameters
25