IBM 8265 Nways ATM Switch, Руководство пользователя

Страница: 28 / 192

Setting Up a Configuration Console in Normal (ASCII) Mode
The following procedure sets up the configuration console in Normal mode and logs you on as the system
administrator with full access to all 8265 commands:
1. Connect an ASCII-type terminal to the RS-232 console port on the front panel of the CPSW module.
2. In the terminal’s user guide, locate the procedure for setting parameters for baud rate, data bits, parity,
and stop bits.
3. Configure these configuration console settings to the values used by the CPSW so that the
configuration console and the CPSW can communicate. The factory-set default settings for the CPSW
are as follows:
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
4. Press Enter. The following message is displayed:
à ð
ATM Switch/Control Module
(c) Copyright IBM Corp. 1994, 1997. All rights reserved.
Password:
á ñ
5. Enter the Administrator password (factory default is 8265).
You can now proceed to configure the 8265, as described in Chapter 3, “Configuring Basic Parameters”
on page 23.
12
IBM 8265: User's Guide