IBM 7316-TF4 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 78

background image

European Community Compliance Statement

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on
the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication equipment.

European Community contact:
IBM Deutschland GmbH
Technical Regulations, Department M372
IBM-Allee 1, 71139 Ehningen, Germany
Tele: +49 (0) 800 225 5423 or +49 (0) 180 331 3233
email: [email protected]

VCCI Statement - Japan

Japanese Electronics and Information Technology Industries Association (JEITA)
Confirmed Harmonics Guideline (products less than or equal to 20 A per phase)

Japanese Electronics and Information Technology Industries Association (JEITA)
Confirmed Harmonics Guideline with Modifications (products greater than 20 A per
phase)

IBM Taiwan Contact Information

58

Power Systems: 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard

«
...
72
73
74
75
76
...
»

Содержание 7316-TF4















































































Отзывы:

Нет отзывов

Похожие инструкции для 7316-TF4

Бренд: Mackie Страницы: 39

Бренд: Safety 1st Страницы: 6

Бренд: ThinkVision Страницы: 36

Бренд: A&D Страницы: 27

Бренд: BEKA Страницы: 26

RadiForce RX211

Бренд: Eizo Страницы: 53

Бренд: 2E GAMING Страницы: 36

Бренд: Sigma Страницы: 32

FPM-3100H Series

Бренд: Advantech Страницы: 46

Бренд: I-Tech Страницы: 31

MultiSync FE772M

Бренд: NEC Страницы: 50

Бренд: Newskill Страницы: 9

Gen4 LCD CAPE Series

Бренд: 4D systems Страницы: 24

migra MPB EN TCP/IP

Бренд: microSYST Страницы: 51

Бренд: AOC Страницы: 74

Optiquest 1782DC

Бренд: ViewSonic Страницы: 63

VX2475Smhl-4K VS16024

Бренд: ViewSonic Страницы: 26

DP-200M/Education

Бренд: DYNAPULSE Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды