IBM 69Y1930, Руководство по эксплуатации продукта

Страница: 9 / 14

IBM Flex System FC3171 8Gb SAN Switch and Pass-thru 9
One 100 Mb Fast Ethernet RJ-45 port for switch configuration and management

Six external SFP+ port connectors to attach SFP+ modules for 8 Gb or 4 Gb connections to external

Fibre Channel devices
An FC link error LED, an FC Tx/Rx LED, and FC Loggen-in LED for each external port on the switch

Cabling requirements
The cables required for the switch are as follows:
8 Gb FC SW SFP+ transceivers (see Table 2)

850 nm communication using multimode fiber cable (50 µ or 62.5 µ) up to 150 m at 8 Gbps, LC

duplex connector
4 Gb FC SW SFP transceivers (see Table 2)

850 nm communication using multimode fiber cable (50 µ or 62.5 µ) up to 300 m at 4 Gbps speed,

LC duplex connector
100BASE-TX (external 100 Mb Fast Ethernet management port)

UTP Category 5 (100 meters maximum)

EIA/TIA-568B 100-ohm STP (100 meters maximum)

RS-232 serial cable: Console cable DB-9-to-mini-USB or RJ-45-to-mini-USB (nonstandard use of

USB connector) that come with optional IBM Flex System Management Serial Access Cable,
90Y9338
Warranty
There is a 1-year, customer-replaceable unit (CRU) limited warranty. When installed in a chassis, these
switches assume your system’s base warranty and any IBM ServicePac® upgrade.
Physical specifications
The approximate dimensions and weight of the switch are as follows:
Height: 30 mm (1.2 in.)

Width: 401 mm (15.8 in.)

Depth: 317 mm (12.5 in.)

Weight: 3.0 kg (6.6 lb)

Shipping dimensions and weight (approximate):
Height: 114 mm (4.5 in.)

Width: 508 mm (20.0 in.)

Depth: 432 mm (17.0 in.)

Weight: 3.4 kg (7.6 lb)
