IBM 69Y1930, Руководство по эксплуатации продукта

Страница: 4 / 14

IBM Flex System FC3171 8Gb SAN Switch and Pass-thru 4
Registered State Change Notification (RSCN):

The switch supports RSCN as described in FC-FLA. RSCN enables an agent to register for change
events in the fabric and attached devices.
Support for standards-based FC-SW2 interoperability

Error detection:

Cyclic redundancy check (CRC)

8-byte and 10-byte conversion

Parity

Long frame and short frame

D_ID mismatch

S_ID mismatch

Frame bundling:

No frame bundling (frames are intermixed from different source ports)

Soft lockdown (the I/O module waits for the sequence to be completed or a gap in the frame

traffic to occur before it services requests from a different port)
Configurable Fabric Address Notification (FAN)

Supports up to 239 switches depending on configuration

8 Gb switch fabric aggregate bandwidth: 320 Gbps at full duplex

Maximum frame size: 2148 bytes (2112 byte payload)

Nonblocking architecture to prevent latency

Fabric Latency: Less than 4 ms

Support for Call Home function

Support for Domain Name Service (DNS)

Support for Internet protocol (IP) Version 4 and Version 6

Support for Internet protocol security (IPsec)

Support for separate trap community strings for each trap address

Support for Simple Network Management Protocol (SNMP) Version 3

Support for vital product data (VPD)

Easier SAN maintenance, isolation and troubleshooting with SANdoctor that is a part of base

firmware
Optional small form-factor pluggable plus (SFP+) modules

The following software features come with the switch module:
QuickTools Web interface

Fabric Security
