IBM 689912U - IntelliStation Z - Pro 6899, Руководство по техническому обслуживанию аппаратной части, Страница: 270 / 472

IntelliStation (Type 6888, 6899):
Any
combination of DIMM sizes is acceptable. DIMM height
must not exceed 1.2 inches. If EDO NP (non-parity)
DIMMs and EDO ECC DIMMs are mixed, they will
configure as non-parity. Install only EDO ECC DIMMs to
enable parity. See “System Board Memory” on page 248
for DIMM size, speed, and type.
IntelliStation (Type 6889):
DIMM sizes of 32, 64,
128, and 256 MB are acceptable. Use 100 MHz. SDRAM
DIMMs. Do not mix Registered and Non-Registered
DIMMs. When installing or removing memory, any
sequence of DIMM size is allowed. Fill each DIMM
connector sequentially, starting at DIMM socket 0. If
SDRAM ECC and SDRAM (non-parity) DIMMs are mixed,
they will configure as non-parity ECC. Install only SDRAM
ECC DIMMs to enable ECC. See “System Board Memory”
on page 248 for DIMM size, speed, and type.
IntelliStation (Type 6893):
DIMM sizes of 16 MB,
32 MB, 64 MB, and 128 MB are acceptable. Start filling
DIMM socket 0, then 1, then 2. Use 3.3 V unbuffered 100
MHz. SDRAM Non-Registered DIMMs only. Only ECC
DIMMs are supported. See “System Board Memory” on
page 248 for DIMM size, speed, and type.
IntelliStation (Type 6898):
DIMM sizes of 16, 32,
64, and 128 MB are acceptable. Use Non-Registered
DIMMs. DIMM height must not exceed 2.5 inches. If
SDRAM ECC and SDRAM (non-parity) DIMMs are mixed,
they will configure as non-parity ECC. Install only SDRAM
ECC DIMMs to enable ECC. See “System Board Memory”
on page 248 for DIMM size, speed, and type.
Total
Memory Bank 0
SIMM 3,4 Bank 1
SIMM 1,2 Bank 2
DIMM
16 MB 0,0 0,0 16
16 MB 4,4 4,4 0
24 MB 0,0 4,4 16
24 MB 4,4 0,0 16
32 MB 0,0 0,0 32
32 MB 8,8 8,8 0
40 MB 4,4 8,8 16
40 MB 0,0 4,4 32
48 MB 4,4 4,4 32
64 MB 8,8 8,8 32
72 MB 4,4 16,16 32
80 MB 8,8 16,16 32
96 MB 16,16 16,16 32
128 MB 16,16 32,32 32
260
IBM PC 300/700, IntelliStation Series HMM