IBM 6643, Руководство пользователя

Страница: 47 / 122

Chapter 4. Using the Configuration/Setup Utility program
33
[ ] In the Configuration/Setup Utility program menus, the configuration
information you can change is enclosed in brackets like these. You
cannot change information that is not enclosed in brackets.
When working with the Configuration/Setup Utility program menu, you must
use the keyboard. The following table shows the keys used to accomplish various
tasks.
Note: Active keys are displayed at the bottom of each screen; not all of these keys
are active on every menu.
Exiting from the Configuration/Setup Utility program
When you finish viewing or changing settings, press Esc to return to the
Configuration/Setup Utility program menu (you might have to press Esc several
times). If you want to save the new settings, select Save Settings before you exit.
Otherwise, your changes will not be saved.
Using passwords
You can use passwords to provide security for your computer and data. There are
two kinds of passwords: a power-on password and an administrator password.
↑ ↓
Use these arrow keys to move among menu items until the item you
want is highlighted.
← →
Use these arrow keys to display and toggle among choices for a menu
item.
Enter Press this key to select a highlighted menu item.
Esc Press this key to exit from a menu after viewing or making changes to
the settings in the menu.
+
Use this key in some menus to increase the numerical value of a
setting.
−
Use this key (the minus or hyphen key) in some menus to decrease the
numerical value of a setting.
0 - 9 Use the number keys in some menus to change the numerical value of
a setting.
F1 Press this key for help on a selected menu item.
F9 Press this key if you changed and saved the setting of a selected menu
item and you want to restore the setting that was active before you
made the change.
F10 Press this key to return the setting of a selected menu item to a default
value.