IBM 6587 - PC 350 - 16 MB RAM, Руководство пользователя

Страница: 58 / 102

POST Message Description
162 A change in device configuration occurred. This error occurs under one or more of the following
conditions:
Ÿ
A new device has been installed.
Ÿ
A device has been moved to a different location or cable connection.
Ÿ
A device has been removed or disconnected from a cable.
Ÿ
A device is failing and is no longer recognized by the computer as being installed.
Ÿ
An external device is not turned on.
Ÿ
An invalid checksum is detected in the battery-backed memory.
Action: Verify that all external devices are turned on. External devices must be turned on before the
computer is turned on.
If you did not add, remove, or change the location of a device, a device is probably failing. Running the
diagnostic programs might isolate the failing device, but you must have the computer serviced.
163 The clock is not working correctly.
Action: Set the correct date and time. If the date and time are set correctly and saved and the 163 error
message reappears, replace the battery.
If this does not correct the problem, have the computer serviced.
Until the computer is serviced, it can be used, but any application programs that use the date and time will
be affected.
164 A change in the memory configuration occurred. This error can be caused by adding memory, removing
memory, or incorrectly installing memory.
Note: The computer can be used with decreased memory capacity.
Action:
1. If you have newly installed memory, see Installing Options in Your Personal Computer to verify that the
new memory is correct for your computer and that the memory module configuration matches one of
the configurations shown in the system memory table.
2. Running the diagnostic tests might isolate the location of the problem memory-module kit and provide
additional information.
3. If the system diagnostic tests detect a failure, have the computer serviced.
48
Using Your Personal Computer