IBM 621858U - IntelliStation M - Pro 6218, Руководство по установке

Страница: 28 / 78

Use the SCSI HostRAID feature of the SCSISelect Utility program to configure
the integrated SCSI controller with integrated RAID, and the devices that are
attached to it. For information about using this utility program, see “Using the
SCSISelect Utility program (for SCSI RAID)” on page 19.
– SAS/SATA Configuration Utility program (for SAS RAID)
With the SAS/SATA Configuration Utility program, you can configure the
devices that are connected to the optional SAS adapter. Use this program to
change default values, resolve configuration conflicts, and perform a low-level
format on a SAS hard disk drive. For information about using this utility
program, see “Using SAS/SATA Configuration Utility program (for Serial
Attached SCSI RAID)” on page 20.
v
ServeRAID Manager
ServeRAID
™
Manager is available as a stand-alone program and as an IBM
Director extension. If a ServeRAID controller is installed in the computer, use
ServeRAID Manager to define and configure the disk-array subsystem before you
install the operating system. For information about using this program, see “Using
ServeRAID Manager” on page 21.
v
Broadcom NetXtreme Gigabit Ethernet controller configuration
To configure the integrated Gigabit Ethernet controller, see “Configuring the
Broadcom NetXtreme Gigabit Ethernet controller” on page 23.
v SCSISelect Utility program (some models)
With the SCSISelect Utility program, you can configure the devices that are
connected to the optional SCSI adapter. Use this program to change default
values, resolve configuration conflicts, and perform a low-level format on a SCSI
hard disk drive. For information about how to start this utility, see “Starting the
SCSISelect Utility program (some models)” on page 23.
See the User’s Guide on the IBM IntelliStation Documentation CD for detailed
instructions for using the configuration programs.
The following sections provide the instructions for starting the utility programs.
Starting the Configuration/Setup Utility program
Configuration/Setup is a menu-driven utility that is part of the BIOS code in the
computer. You can use it to:
v
Configure serial connector assignments
v Change the startup sequence
v
Enable USB keyboard and mouse support
v
Resolve configuration conflicts
v
Set the date and time
v
Set an administrator password
To start the Configuration/Setup Utility program, complete the following steps:
1. Turn on the computer and watch the monitor screen. If the computer is already
on when you start this procedure, you must shut down the operating system,
turn off the computer, wait a few seconds until all in-use LEDs are turned off,
and restart the computer.
2. When the message
Press F1 for Configuration/Setup, Press F12 for Boot
Menu
appears on the screen during startup, press F1. (This prompt appears on
the screen for only a few seconds. You must press F1 quickly.) If you have set
16
IBM IntelliStation M Pro Type 6218: Installation Guide