IBM 4764, Руководство по установке

Страница: 18 / 34

Requirements and specifications
Hardware requirement
The coprocessor must be installed in an IBM eServer xSeries approved server with a PCI-X (Version
1.0) bus slot available. No additional hardware or cabling is required.
Notes:
1. The 9-pin D-shell port is for development use only. It is not intended for customer use.
2. The ethernet port is blocked. It is not intended for customer use.
Software requirement
The coprocessor requires support software, for example, the IBM 4764 CCA Support Program, for both
the host machine and for its internal firmware. Operating system support is determined by the support
software.
This publication does not discuss the installation of support software. For information about the latest
software features available, visit the product Web site at http://www.ibm.com/security/cryptocards.
Power requirement
The power requirement for the IBM 4764-001 PCI-X Cryptographic Coprocessor is:
v
Voltage supply: 3.3V, ± 10 percent
v Total power requirement: 12.50 watts maximum
Environmental specifications
The environmental specifications for the IBM 4764-001 PCI-X Cryptographic Coprocessor are shown in
Table 1.
Table 1. Operating, storage, and shipping specifications
Operating environment Storage environment Shipping environment
Temperature +10° C - +40° C
(+50° F - +104° F)
+1° C - +60° C
(+33.8° F - +140° F)
-15° C - +60° C
(+5° F - +140° F)
Relative humidity 8 - 80% 5 - 80% 5 - 100%
Wet bulb +27° C (+80.6° F) +29° C (+84.2° F) +29° C (+84.2° F)
Pressure (minimum) 768 mbar 700 mbar 550 mbar
Physical dimensions
The coprocessor is a standard height, short-type PCI-X adapter card
4.2 in. by 6.9 in. (107mm by 175mm).
2
4764 PCI-X Cryptographic Coprocessor Installation Manual
|
|
|
|
|
|