IBM 3746-900, Руководство по установке и обслуживанию

Страница: 63 / 264

Notes:
a. In the 3270 Session Customization panel, you have entered the:
1) LU local/NAU address
2) Long session/LU name
These parameters must be the same as the values recorded in the
switched major definition (see Figure 1-41 on page 1-43 for an example of
a switched major node definition).
In this example:
1) LU local/NAU address <===>
03
2) Long session/LU name <===>
MOSSEEMU
3) For the MOSSEEMU LU, you must use the logon mode table entry
SNX32702
to allow the file transfer.
b. Use the LU name to identify the session.
c. The LU local address must be equal to 03 or above (values 01 and 02 are
used and reserved by the Service Processor product).
In the switched major node, add one LU statement for the 3270 session:
MOSSE PU ADDR=04,PUTYPE=2,NETID=SYSTST,CPNAME=MOSSNMVT, X
MAXPATH=8,MAXDATA=265,MAXOUT=1,X
DISCNT=NO
MOSSEEMU
LU
LOCADDR=03
,DLOGMOD=
SNX32702
Figure 1-41. Example of a Switched Major Node Definition
21. For RETAIN and RSF access, modify the options and enter the telephone
numbers according to the customer choice:
a. Disable or enable (set by default) the RSF facility to generate the alerts to
NetView (see the parameter worksheet “Parameter Definitions for RSF” on
page C-5).
b. Enable or disable (set by default) the automatic microcode download option
(see the parameter worksheet “Set Automatic Microcode Download Option”
on page C-5).
c. Enter the telephone numbers according to the local IBM service support
information.
Chapter 1. Installing and Setting Up Your Service Processor
1-43