IBM 3746-900, Руководство по установке и обслуживанию

Страница: 126 / 264

Viewing the Test Log
Errors reported by the diagnostic test are displayed by the program as a failed test.
To view details of a failure or to view a list of test results, do the following from any
test category panel:
Press F3 to activate the log file.
Press F3 again to save the file to diskette or F2 to print the file.
SIMM/DIMM Memory Errors
SIMM/DIMM error messages issued by the IBM PC Enhanced Diagnostics:
Message Failure Found Recommended Actions
2 xx -1 y A memory error was detected in
SIMM socket
y.
Replace the SIMM in the socket
identified by the last digit of the
error code.
Rerun the test.
If the same error code occurs
again, replace the system board.
2 xx -2 y A memory error was detected in
DIMM socket
y.
Replace the DIMM in the socket
identified by the last digit of the
error code.
Rerun the test.
If the same error code occurs
again, replace the system board
or where memory is on the
processor card, replace the
processor card.
Corrupt
BIOS Information in BIOS is not as
expected.
Not able to find expected DMI
information from BIOS.
Memory controller chipset vendor
ID does not match expected
value.
Reflash the BIOS.
Replace the system board.
Test
aborted by
user User stopped test. Restart test.
Note:
In the code y is the SIMM/DIMM socket number. See “System Board Layout” on
page H-5 to locate memory socket.
4-8
3745-XXA 4-8 3746-9X0: 6578 SPIM