Ethernet TCP/IP Attachment Worksheet
Important
Installing an Ethernet attachment requires changes to your host system configuration. For detailed
worksheets, instructions, and examples, refer to the
IBM InfoPrint 60; 3130, 3160, and 3935 Advanced
Function Printers: Atttachment Configuration Handbook, S544-3977.
The printer is connected to a host Ethernet using the Integrated Ethernet LAN adapter contained in the
control unit.
The control unit can be attached directly to standard Thick (10Base5) Ethernet coaxial cable (Feature
Code 4163) (3160-001). The output connector is a thick, 15-pin, D-shell “slide-latch” type that is
compatible with IEEE 802.3 Section 7.6. Connection to thick Ethernet media is through an Ethernet/IEEE
802.3 AUI cable available from OEM vendors. Attachment to thin (10Base2) or twisted-pair (10BaseT)
Ethernet media is through external transceivers.
The coaxial T connector is used in addition to the 10Base2 transceiver to connect to the thin Ethernet
coaxial cable. You should use a customer-supplied RJ45 unshielded twisted-pair cable (must meet IEEE
802.3 requirements) to attach the 10BaseT transceiver to the Ethernet twisted-pair hub.
Table 9. Ethernet TCP/IP Configuration
Item
Available Values
Selected Value
Install Status
Installed or Not Installed
TCP Port
5001 to 65536
IP Address
X.X.X.X where X <=255
Subnet Mask
X.X.X.X where X <=255
Default Gateway Address
X.X.X.X where X <=255
Standard MTU Size
60 to 1500 (bytes)
IEEE802.3 MTU Size
60 to 1492 (bytes)
Ethernet Type
Standard or IEEE802.3
Alternate Address
0000 0000 0001 to FFFF FFFF FFFE
ñ
MAC (Medium Access Control)
Read-only field
Note:
ñ
Do not enter the spaces shown; they are included here as a visual aid.
Install status
An indication of whether the attachment is installed.
TCP port
The TCP socket address of the attachment. This value must match the
corresponding host parameter.
IP address
The Internet Protocol address of the printer in dotted decimal format.
Subnet mask
The mask identifying the local subnet in dotted decimal format. If there is no local
subnet, leave this field blank.
Default gateway address
The IP address of the default gateway in dotted decimal format.
Standard MTU size
MTU is an abbreviation for maximum transmission unit. This TCP/IP Ethernet type
ranges from 60 to 1500.
Chapter 5. Configuring the Printer and Its Attachments
25
Содержание 3160
