IBM 3110X - Cisco Catalyst Switch, Дополнительное руководство

Страница: 17 / 20

Cisco Catalyst Switch Modules 3110G and 3110X for IBM BladeCenter 17
Network cabling requirements
The network cables required for the switch module are as follows.
Cisco Catalyst Switch Module 3110G network cables
10BASE-T:
z
UTP Category 3, 4, 5 (100 meters (328 feet) maximum)
z
100-ohm STP (100 meters maximum)
z
100BASE-TX:
z
UTP Category 5 (100 meters maximum)
z
EIA/TIA-568 100-ohm STP (100 meters maximum)
z
1000BASE-T:
z
UTP Category 6
z
UTP Category 5e (100 meters maximum)
z
UTP Category 5 (100 meters maximum)
z
EIA/TIA-568B 100-ohm STP (100 meters maximum)
z
Cisco Catalyst Switch Module 3110X network cables
10GBASE-SR cables are listed in Table 10.
Table 10. 10GBASE-SR cabling specifications
Wavelength Cable type Core size
(microns) Modal bandwidth
(MHz/km) Maximum
cable length
850 nm MMF 62.5 160 85 feet (26 m)
850 nm MMF 62.5 200 108 feet (33 m)
850 nm MMF 50 400 217 feet (66 m)
850 nm MMF 50 500 269 feet (82 m)
850 nm MMF 50 2000 984 feet (300 m)
10GBASE-LRM cables are listed in Table 11.
Table 11. 10GBASE-LRM cabling specifications
Wavelength Cable type Core size
(microns) Modal bandwidth
(MHz/km) Maximum
cable length
1310 nm MMF 62.5 500 984 feet (300 m)
1310 nm MMF 50 400 787 feet (240 m)
1310 nm MMF 50 500 984 feet (300 m)
10GBASE-CX4: The InfiniBand copper cable with 4X InfiniBand connector has a maximum cable length
of 49 feet (15 m).