IBM 22P6979, Руководство пользователя

Страница: 17 / 52

Step 6. Attaching the cables to the drive
Connect the cables to the CD-RW drive as follows:
1. If you want to connect the CD-RW drive to your sound adapter or to the sound
function on your system board, locate the included audio cables and determine
which cable best fits the CD audio-in port on your sound adapter. Connect one
end of the selected audio cable to the CD-RW drive audio-out connector
1
,
and the other end of the cable to your sound adapter CD audio-in port. Save
the other cable in case you use a different sound adapter in the future.
Note: Some computers have a smaller connector that is incompatible with the
included audio cable. If your computer has this kind of connector, you
must purchase a new audio cable.
2. Attach a 40-pin IDE-cable connector
2
to the IDE connector on the drive.
Align the cable so that the color-coded edge is closest to the power cable
connector
3
. Use the IDE cable provided with this option if there is no cable
attached to the IDE port or if there is only one device connector on the IDE
cable. If you use the included IDE cable, attach one end of the cable to your
system board IDE port or to your IDE adapter, and the other end of the IDE
cable to the CD-RW drive.
3. Locate one of the available power cables attached to your computer power
source. Attach the four-pin power cable
3
to the CD-RW drive DC power
connector.
Step 7. Completing the hardware installation
To complete the hardware installation, do the following:
1.
Be sure that the drive is securely mounted and the connectors are firmly
attached.
2. Be sure the cables do not interfere with the computer cover and do not block
any fan blade or air-flow paths.
3. Reinstall the computer cover.
4. Reconnect all devices and check any devices that might have become
disconnected, such as the keyboard, mouse, and monitor.
5. Connect all power cords to electrical outlets.
Step 8. Updating your computer configuration
After you have completed the hardware installation, restart your computer.
Usually, the configuration-setup information screen is displayed when you turn on
your computer. If you do not see this screen, check your computer documentation
for information about accessing the configuration or setup utility program.
Installation and user’s guide
7