IBM 2216, Руководство по установке оборудования

Страница: 15 / 28

Adapter Placement
Write in the feature codes of each of your
adapters on the diagram below.
┌─────────────────────────────────────────────────────────┐
│
Adapter Slots │
├───────────────┬──────┬──────┬──────┬──────┬──────┬──────┤
│
│ A │ B │ 1 │ 2 │ 3 │ 4 │
│ │ │ │ │ │ │ │
│ │ │ │ │ o o │ │ │
│ │ │ │ │ │ │ │
│ │ │ │ │ o │ │ │
│ │ │ │ │ │ │ │
│ │ │ │ │ o o │ │ │
│Redundant │ │ │ │ │ │ │
│ Power │ │ │ │ o o │ │ │
│ Supply │ │ │ │ │ │ │
│ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │
│ │ │1 2 │ │ │ │ │
│ │ │o o │ │ │ │ │
│ │ │ │ │ │ │ │
│ │ │o o │ │ │ │ │
│ │ │ │ │ │ │ │
├───────────────┤ │o ├──────┼──────┼──────┼──────┤
│ o │ │ │ │ │ │ │
│ │ │o │ │ │ │ │
│ o │ │ │ │ │ │ │
│ │ │ │ │ │ │ │
│ │ │ S │ │ │ │ │
│ │ │ y │ │ │ │ │
│ o (AC) │ │ s │ │ │ │ │
│ │ │ t │ │ │ │ │
│ o (DC) │ │ e │ │ │ │ │
│ │ │ m │ │ │ │ │
│ │ │ │ │ │ │ │
│ │ │ C │ │ │ │ │
│ │ │ a │ │ │ │ │
│Power │ │ r │ │ │ │ │
│ Supply │ │ d │ │ │ │ │
│ │ │ │ │ │ │ │
│ │ │ │ 5 │ 6 │ 7 │ 8 │
├───────────────┴──────┴──────┴──────┴──────┴──────┴──────┤
│
│
│ Fan Tray │
│ │
└─────────────────────────────────────────────────────────┘
Power Supply Status
LED Status
Important Names and Numbers
System Card LEDs Meaning
PCMCIA 1 or
PCMCIA 2
(Yellow) On PCMCIA device has a fault,
is not installed, or is not
seated correctly.
OK (Green) On Card hardware is operating
normally.
FAULT (Yellow) On Card hardware has a fault.
Hard Drive (Yellow)
On Hard drive has failed.
Adapter LEDs Meaning
OK (Green) On Adapter is operating
normally.
FAULT (Yellow) On Adapter has a fault.
Wrong slot (Yellow) Adapter is in the wrong slot.
Green port
When on
When off
Port is operating normally.
Port is not configured or is
disabled.
Yellow port
When on
When flashing
One or more ports has a
hardware fault.
One or more ports has a
port I/O or network failure
(use external wrap plug to
isolate).
Contact Name Telephone
Number
System Administrator
LEDs Meaning
Yellow On
(Overcurrent) There is an overcurrent condition
caused by an adapter or fan
assembly.
Service Representative
Green DC On
+
5 V,
+
12 V, and
−
48 V are OK.
Green AC On AC voltage is present.
9