IBM 2074, Информация по установке и обслуживанию

Страница: 55 / 78

The trace buffer is 2000 entries long and wraps automatically. This makes it
useless, except for verifying that you have tracing enabled for the device. The trace
buffer display includes text descriptions of each entry, added by the display
program. The actual trace data is shown as eight hexadecimal characters at the
beginning of each line.
The trace information is provided for use by IBM 2074 support personnel only. You
may be asked by the Support Center to bring up this screen to verify that I/O data
is being traced and to save the buffer contents, now or after a manual refresh (F1
key) to the AWSTRACE.LST file (click
FILE on grey menu bar at top of screen).
Note: There is only one AWSTRACE.LST file for both Channel Adapters 0 and 1
and each time you click on
FILE , this file is replaced, not appended to. You
must open an OS/2 window and manually rename the file if you wish to save
it.
2074 Error Logs
The 2074 provides several logs that can be useful if you experience problems
during installation and configuration.
v C:\2074\AWSERROR.LOG
v
C:\2074\INSTALL.LOG
v C:\OS2POPUP.LOG
v
C:\IBMCOM\LANTRAN.LOG
Figure 3-3. The 2074 I/O Trace screen
Chapter 3. Service Procedures
3-5