IBM 2 Gigabit Fibre Channel PCI-X Adapter 5704, Инструкция по установке и использованию

Страница: 31 / 46

Chapter 6. Gigabit Fibre Channel PCI Adapter Interface
The Gigabit Fibre Channel PCI Adapter (Type 4-S), 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(Type 4-W), and 2 Gigabit Fibre Channel PCI-X Adapter (Type 5704) connect host systems to a storage
subsystem through a Fibre Channel interface.
Adapter LEDs
The adapters have two LEDs: green and yellow, both located near the connectors. These LEDs can be
used to determine the state of the adapter.
The following table provides LED information for the Gigabit Fibre Channel PCI Adapter (Type 4-S).
Gigabit Fibre Channel PCI Adapter (Type 4-S)
Green LED Yellow LED State
Off Off Wake up failure (dead board)
Off On POST failure (dead board)
Off Slow blink Wake up failure
Off Fast blink Failure in POST
Off Flashing POST processing in progress
On Off Failure while functioning
On On Failure while functioning
On Slow blink Normal - inactive
On Flashing Normal - active
On Fast blink Normal - busy
Slow blink Off Normal - link down or not yet started
Slow blink Slow blink Off line for download
Slow blink Fast blink Restricted off-line mode (waiting for restart)
The following table provides LED information for the 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(Type 4-W).
2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus (Type 4-W)
Green LED Yellow LED State
Off Off Wake up failure (dead board)
Off On POST failure (dead board)
Off Slow blink Wake up failure monitor
Off Fast blink Failure in POST
Off Flashing POST processing in progress
On Off Failure while functioning
On On Failure while functioning
On Slow blink 1 Gb link rate - normal, link up
On Fast blink 2 Gb link rate - normal, link up
Slow blink Off Normal, link down
Slow blink On Not defined
21