IBM 2 Gigabit Fibre Channel PCI-X Adapter 5704, Инструкция по установке и использованию

Страница: 17 / 46

Chapter 3. Installing the Device Driver on an RS/6000 and
pSeries System
This chapter explains how to install device driver software on an RS/6000 and pSeries (not an RS/6000
SP) system unit.
Note: If the adapter was installed prior to the installation of the AIX operating system, do not continue with
this section. The device driver software was automatically installed with AIX. Proceed to “Verifying
the Installation” on page 15.
Each Fibre Channel adapter requires a different device driver. To determine the correct device driver for
your adapter, see the following table.
Adapter Device Driver
Gigabit Fibre Channel PCI Adapter (FC 6227, Type 4-S) devices.pci.df1000f7
2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus (FC 6228, Type 4-W) devices.pci.df1000f9
2 Gigabit Fibre Channel PCI-X Adapter (FC 6239, Type 5704) devices.pci.df1080f9
If you are installing the adapter in a system that already has AIX installed, proceed with the software
installation and perform the following steps:
1. Ensure that the system unit power is on.
2. Log in as root user.
3. Insert the media containing the device driver software (for example, CD-ROM) into the appropriate
media device.
4. Type the following:
smitty devinst
5. Press Enter.
6. The Install Additional Device Software menu is displayed, and the INPUT device/directory for
software option is highlighted.
7. Select or type your input device :
v
Press F4 for a list of devices and select the correct device. Press Enter.
OR
v Type the name of the input device you are using in the entry field and press Enter (for example,
CD-ROM).
8. The Install Additional Device Software menu is expanded, and the SOFTWARE to install option is
highlighted.
9. Press F4 to display the SOFTWARE to install menu.
10. Type the following to display the Find window:
/
11. To find the device driver for your adapter, do the following:
v For adapter Type 4-S, type devices.pci.df1000f7
v
For adapter Type 4-W, type
devices.pci.df1000f9
v For adapter Type 5704, type devices.pci.df1080f9
Press Enter. The system will find and highlight the device driver software, for example, for adapter
Type 4-S:
devices.pci.df1000f7 ALL
12. Press F7 to select the highlighted device driver software.
7