IBM 1585 (MT 4539) Скачать руководство пользователя страница 97

Страница: 97 / 124

Printing multiple-language PDFs

Troubleshooting

Printing multiple-language PDFs

Solving printing problems

Symptom

Cause

Solution

Some documents do not
print.

The documents contain
unavailable fonts.

1 Open the document you want to print in Adobe Acrobat.
2 Click the printer icon.

The Print dialog appears.

3 Check the Print as image box.
4 Click OK.

Symptom

Cause

Solution

The operator panel
display is blank or
displays only diamonds.

The printer self test
failed.

Turn the printer off, wait about 10 seconds, and turn the printer
back on.

If the

Performing Self Test

and

Ready

messages do not

appear, turn the printer off and call for service.

The message

USB

device unsupported

appears when using a
USB device.

The USB device you are
using may not be
supported or has an
error. Only specific USB
flash memory devices
are supported.

For information regarding tested and approved USB flash memory
devices, contact the place where you bought the printer.

Jobs do not print.

The printer is not ready
to receive data.

Make sure

Ready

Power Saver

appears on the display before

sending a job to print. Press

to return the printer to the

Ready

state.

The specified output bin
is full.

Remove the stack of paper from the output bin, and then press

The specified tray is
empty.

Load paper in the tray.

You are using the wrong
printer driver or are
printing to a file.

• Verify you are using the printer driver associated with your

printer.

• If you are using a USB Direct interface, make sure you are

running Windows 98/Me, Windows 2000, Windows XP, or
Windows Server 2003 and using a Windows 98/Me,
Windows 2000, Windows XP, or Windows Server 2003
compatible printer driver.

Your internal print server
is not set up properly or
is not connected
properly.

Verify that you have properly configured the printer for network
printing.

You are using the wrong
interface cable, or the
cable is not securely
connected.

Make sure you are using a recommended interface cable.

Make sure the connection is secure.

Содержание 1585 (MT 4539)





























































































































Результаты поиска

Содержание 1585 (MT 4539)

Отзывы:

Похожие инструкции для 1585 (MT 4539)

Бренды по названию

Популярные бренды

IBM 1585 (MT 4539), Руководство пользователя

Результаты поиска

Содержание 1585 (MT 4539)

Отзывы:

Похожие инструкции для 1585 (MT 4539)

Бренды по названию

Популярные бренды