IBM 1585 (MT 4539), Руководство пользователя

Страница: 107 / 124

Enabling operator panel menus
105
Administrative support
Enabling operator panel menus
1
Turn the printer off.
2
Press and hold and while turning the printer on.
3
Release both buttons when
Performing Self Test
appears on the display.
The printer performs its power-on sequence, and then
Config Menu
appears on the first line of the display.
4
Press until
Panel Menus
appears, and then press .
5
Press until
Enable
appears, and then press .
The following messages appear briefly in succession:
Submitting Selection
and
Enabling Menus.
The operator panel returns to
Panel Menus
.
6
Press until
Exit Config Menus
appears, and then press .
Activating Menu Changes
appears. The menus are enabled.
Resetting the Printer
appears briefly followed by a clock. The operator panel then returns to
Ready
.
Restoring factory default settings
When you first enter the printer menus from the operator panel, you may notice an asterisk (*) to the left of a value in the
menus. This asterisk indicates the factory default setting. These settings are the original printer settings. (Factory defaults
may vary for different regions.)
When you select a new setting from the operator panel,
Submitting Selection
appears. When the Submitting Selection
message disappears, an asterisk appears next to the setting to identify it as the current user default setting. These settings
are active until new ones are stored or the factory defaults are restored.
To restore the original printer factory default settings:
Warning: All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) will be deleted.
(Resources residing in flash memory or on the optional hard disk remain unaffected.)
1
Make sure the printer is on and
Ready
appears on the display.
2
Press on the operator panel.
3
Press until
Settings
appears, and then press .
4
Press until
Setup Menu
appears, and then press .
5
Press until
Factory Defaults
appears, and then press .
6
Press until
Restore Now
appears, and then press .
7
The message
Restoring Factory Defaults
appears, followed by the
Ready
message.
When you select Restore:
• No other button actions are available on the operator panel while
Restoring Factory Defaults
appears.
• All menu settings return to the factory default values, except:
– The operator panel Display Language setting in the Setup menu.
– All settings in the Parallel menu, Serial menu, Network menu, and USB menu.