IBM 1269-3S2, Инструкция по установке, обслуживанию и эксплуатации

Страница: 41 / 77

Getting Started
25
2.7.3 Installation Procedure
1 Ensure that the anti-tamper locks are disengaged.
2 Release the carrier handle by pressing the latch in the handle towards the right and insert the carrier into
the enclosure (
Figure 2–11 ).
Important For a Rack Mounted System: Ensure that the carrier is orientated so that the drive is uppermost
and the handle opens from the left.
3 Slide the carrier, gently, all the way into the enclosure until it is stopped by the camming lever on the right
of the carrier (
Figure 2–12 )
4 Cam the carrier home - the camming foot on the base of the carrier will engage into a slot in the enclosure.
Continue to push firmly until the handle fully engages. A click should be heard as the latch engages and
holds the handle closed (
Figure 2–13 ).
Note Ensure that the handle always opens from the left.
Note Removal is the reverse of this procedure (press on the latch to release the handle).
Figure 2–11 Installing a Drive Carrier Module (1)