IBM 10/100 EtherJet, Инструкция по установке и эксплуатации

Страница: 22 / 64

If you are installing the IBM 10/100 EtherJet PCI Adapter with
Wake on LAN, go to “Connecting Your Wake on LAN Cables”
on page 2-4.
6
Remove the screw and cover for the appropriate PCI
Busmaster-capable expansion slot. (Refer to your PC manual.)
Keep the cover to use again if you remove the adapter.
7
Place the adapter in the slot.
Note: Most PCI slots in PCs are Busmaster-enabled, but
some are not. If you have configuration problems, refer to your
PC manual.
Figure 2-1. PCI Slot Illustration
8
Push the adapter into the slot until the adapter is seated firmly.
Secure the adapter bracket with a screw.
9
If you are installing more than one adapter, repeat steps 6, 7,
and 8 for each adapter you want to install.
Otherwise, go to step 10.
2-2
10/100 EtherJet PCI Adapters
Title: ASB3CNTL CreationDate: 07/16/98 18:07:52