IBM 10/100 EtherJet CardBus Adapter, Инструкция по установке и планированию

Страница: 45 / 64

Diagnostics and Troubleshooting 4-7
LINESPEED (for 16-bit DOS drivers) forces operation to 10 or
100 Mbps. If the keyword is not present the line speed is automat-
ically detected (default).
LINESPEED (for 32-bit NDIS3 driver IBMC.SYS) forces operation
to 10 or 100 Mbps. Valid parameters are AutoDetect, 10 Mbps,
and 100 Mbps. Default is AutoDetect.
LINKDISABLE disables link integrity for non-IEEE 10BASE-T
networks such as StarLAN 10. Without this keyword in the driver
command line, the driver defaults to link integrity ENABLED.
MEM, MEMORY specifies the host PC memory location for the
IBM adapter in hexadecimal notation, when MODE MEMORY
(memory-mapped I/O) is being used (see MODE). The memory
block occupies 4 KB of host memory.
MODE when set to IO disables requests for memory-mapped
mode on systems that only support an I/O-driven card. The MEM-
ORY setting provides increased performance on computers that
allow simultaneous availability of memory and I/O resources.
NETWORKADDRESS allows you to override adapter's unique
network node address by specifying a different node address.
NOBURST disables burst mode reads on the EtherJet CardBus
Adapter. Using this keyword forces the adapter to initiate a bus-
master request for each read, negatively impacting performance.
NOCHECK disables verification of adapter resources. If the driver
detection and verification code is causing problems when loading,
this keyword can be used to turn the feature off.
NODEADDRESS see NETWORKADDRESS.
NOEARLYRX disables Advanced Look-ahead Pipelining features
of the EtherJet CardBus Adapter. This keyword can be used to
troubleshoot systems that have inexplicable network problems.
Using this keyword could negatively impact performance.
NOEARLYTX disables early transmit capability of the EtherJet
CardBus Adapter. This keyword can be used to troubleshoot sys-
tems with inexplicable network problems. Using this keyword
could negatively impact performance.
NOLED turns off LED indicators to conserve power.
fcp1mst.book Page 7 Wednesday, June 2, 1999 4:02 PM