©Copyright LOTRONIC 2013
6
TO PLAY USB-DISK MP3/WMA MUSIC
1. Switch power source to ON.
2. Insert a USB-DISK
3. Select a title and press
►
TO PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE IN socket and press USB/AUX.
2. Insert a microphone TRS Jack into MIC1 or MIC2 and switch the VHF on.
3. Adjust the MIC VOL, ECHO, MASTER VOL.
TO RECORD A MUSIC
1. To start record function, press the RECORD button.
2. Adjust level of the audio input you want to use
3. To stop record, press the RECORD button again.
TO USE VOX FUNCTION
When VOX function is enabled, the music level will decrease when somebody
talks into one of the microphones. The music level becomes normal when the
user stops talking into the microphone.
To activate this function, switch the VCV switch to on. If you want to disable
this function, set this switch to off position
BLUETOOTH FUNCTION
1. Switch on the Bluetooth function via power switch (24). The power LED (23)
will light up
2. Switch on your Bluetooth Device
3. Press button
(25) until the LED (26) is flashing red and blue
4. Activate the Bluetooth connect function of your device
5. Select BLUETOOTH in the list of found devices
6. You are ready to play your music
REAR PANELOF PORT12/15VHF-BT
1. USB input
2. SD card slot
3. MP3 display
4. MP3 controls
5. Input selector switch
6. Master volume control
7. Bass control
8. Treble control
9. Echo control
10. Delay control of the microphone
Содержание PORT12VHF-BT
Страница 2: ...Copyright LOTRONIC 2013 2...