© Copyright LOTRONIC 2017
PAR-MINI-UV
4
DMX Connection
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
DMX connector configuration
Termination reduces signal errors. To avoid signal transmission problems and interference, it is always
advisable to connect a DMX signal terminator.
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
Input voltage: ................................................................................ AC220
～
240V 50/60Hz
Consumption ................................................................................................................. 25W
Channels .............................................................................................................................. 4
LED: .........................................................................................................
12 x 2W UV LED
Function: .................................................... DMX512, Auto-run, Sound active, Master-slave
Dimensions per unit: ............................................................................. 120 x 120 x 90mm
Weight: ........................................................................................................................ 460g
INPUT
COMMON
DMX +
DMX-
Resistance 120 ohm
1/ 4w between pin 2
(DMX-) and pin 3 (DMX+)
of the last fixture.
