Maintenance
Clean and use frequency
To confirm the power supply have cut off before disconnect the light or repair it ,it is very important to keep the
light cleaning .not only can keep the light maximum brightness output but also can prolong their use life . please
use the high quality professional glass and soft cloth to clear up the equipment ,not permission to use the alcohol
and organic liquid clean at least once each year use vacuum dust collector .
When the light does not start, check whether the light power supply fuse blown or not, if blow, install the
appropriate fuse, and start the light after find out troubleshooting, but please attention to the technically person
allowed to carry out maintenance work.
Faulty Disposal
Familiar Faulty
Disposal
Light can not start
Check if the fuse burnt out or not
Check if the power connect well or not
Check if the circuit board +12V or +5V short circuit of earth
Light can be shine well, but can not
be control by controller
Check if the light’s DMX original address setup right or not.
Check the connection details of communication control wire
5W white LED not brightness
Check if LED lamp damage or not
Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.
© Copyright Lotronic 2009
7
