DIP number
Function description
remark
10+1 R
10+2 G
10+3 B
10+2+1 R+G
10+3+1 R+B
10+3+2 G+B
10+3+2+1 R+G+B
Fixed color (away brightness)
10+8 Auto
running
Auto running show(include shade. strobe. change
color and so on)
10+8+1 R
shade
10+8+2 G
shade
10+8+3 B
shade
10+8+2+1
RGB shade speed 1 fast
10+8+3+1
RGB shade speed 2
10+8+3+2
RGB shade speed 3 slow
10+8+3+2+1 R+G+B
shade
Shade
10+9
RGB change each other
10+9+1 R
strobe
10+9+2 G
strobe
10+9+3 B
strobe
10+9+4 R+B
strobe
10+9+5 R+G
strobe
10+9+6 G+B
strobe
Strobe
10+9+2+1
R+G+B strobe(speed
adjustment)
(DIP3-DIP7) adjustment strobe speed
10+7 Sound
control1
10+7+1 Sound
control2
10+7+2 Sound
control3
10+7+3 Sound
control4
10+7+4 Sound
control5
10+7+5 Sound
control6
Appendix
1. Usage of the Signal Cable. Connector
The connection between the output and input, it’s available to use the 3 pins XLR cable which provided by the
manufacturer. Signal cable from the DMX output of the controller to the input of the first master light, and connect
to the DMX input of second slave light from the DMX output of the first master light, analogously till connected all
the slave lights, and insert the last connector to the output of the final light.
If you want to prolong the connection of signal cable, the connection of the pins between male connector and
female connector should be:1 to 1; 2 to 2; 3 to 3,or it will cause communication interruption. Notice: the diameter
of core of every cable should be 0.5mm at least double core shelter cable should be used. The signal connecting
must use the attached 3 pins XLR cable. Notice, all the internal lead wire of the 3 pins XLR cable should not touch
to each other or connect to the connector.
The light is available to receive the DMX512 signal, connect the signal plug to the panel which marked with “IN”
and connect it to the next light. then, connect to the “IN” of next light from the “OUT”. The DMX signal terminal
organ is recommended when the lighting signal is connecting. It will avoid to damage the signal which caused by
the noise, DMX terminal organ is a XLR connector, connect with a 120
Ω
resistor between the pin 2 and pin 3 of
the XLR connector, and connect it to the last OUTPUT socket of the final light. Follow picture:
© Copyright Lotronic 2009
5
1
st
light
2
n
d
light
3
rd
lig
ht
IN OUT
IN
OUT
IN
OUT
DMX
120R
