©Lotronic – 2012 LP64LED-FLAT-RC
REMOTE CONTROLLER OPERATION
1. Press “Auto” to set the unit to Auto run.
2. Press “Sound” to set the unit to Sound activated
mode. Second press to adjust sound active sensitivity.
Note: Use in conjunction with the + & - buttons to
select 3 kinds of sound mode or adjust sound active
sensitivity.
3. Press “DMX” to set the units to DMX mode. Second
press to DMX channel mode. Note: Use in conjunction
with the + & - Buttons to select DMX address or change
DMX channels. Also can use 1-9 Number buttons to set
the DMX address. Example: set DMX address 16, press
button0, button 1 and button 6.
4. Press “BLACK OUT” to switch the unit on or off.
5. The “Red”, “Green”, “Blue” & “White” (Used for four colour LED units only)
buttons are used to control the intensity of individual colours. Note: Use in
conjunction with the + & -Button to change the dimmer.
6. Press “Jump” to set the units to Colour jump change mode. Note: Use in
conjunction with the + & - button to change the speed.
7. Press “Fade” to set the units to Colour fade change mode. Note: Use in
conjunction with the + & - Button to change the speed.
8. Press “Colour” to set the units to static colour mode. Note: Use In conjunction
with the + & - buttons to select 255 kinds different colours. Also, you can press
0-9 Number buttons to select 0 - 255 kinds different colours directly.
9. Press “Flash” to set the units to strobe mode. Note: Use in conjunction with
the + & - Button to change the strobe speed. Also you can change the strobe
speed on colour Jump mode.
10. Note: You can see the value on the LED display when you use the IR remote
controller operation.
DMX values and Functions:
3-CHANNEL MODE:
Channel
Value
Function
CH1
0-255
RED dimmer
CH2
0-255
GREEN dimmer
CH3
0-255
BLUE dimmer
