3
©Copyright LOTRONIC 2016
DERBY-LAS
Specifications
Voltage .................................................................................................................. 220-240V AC~ 50/60Hz
Consumption ...................................................................................................................................... 40W
Laser class .............................................................................................................................................. 3B
Laser diode ........................................................................... Red: 120mW 650nm; green: 30mW 532nm
LED source ...................................................................................................................................... 9 x 3W
LED colours ..................................... Red, Green, Blue, White, Warm White, Orange, Yellow, Purple, UV
Dimensions ................................................................................................................. 185 x 162 x 210mm
Weight ............................................................................................................................................. 1.48kg
Power supply, wire Connection
Use a dedicated plug to connect the LED light and power. Make sure the unit is connected to the appropriate
power supply.
Warning
Carry the lights only by the handle.
Features
The control panel features 4 buttons and a 4-digit LED display.
Operation
1)
When power is on, the digital LED display works with red dots. When
a DMX signal is present, the dot will be shiny.
2)
DMX address code setting: Press “MENU” button. When the digital LED displays d001-d512, press “UP” or
“Down” to set the address code. The code ranges from 001-512.
Button Specifications:
All Effects
Motor Speed
Autn
An01-An07
S.01-S.09
Derby effects
Motor Speed
Autp
Ap01-AP07
S.01-S.09
Laser effects
Motor Speed
AutF
AF01-AF04
S.01-S.09
Sound effect - Whole Unit
Sound Effect - Derby
Sound Effect - Laser
Sound
S.01-S.03
S0.4
S.05
SLAU
Slave
D001-d512
DMX
Connection of Signal Cable
You can use the 3-pin XLR cable to connect the OUT socket of the first light and the IN socket of the following
light. Connect all the lights as below:
