MANUAL - FREESOUND350-CD
3
CHARGING THE BATTERY
1.
Connect the mains power plug to an AC outlet and turn the power switch on the rear panel to ON position.
2.
If the LED indicator "FULL" on the top panel lights up, the battery is fully charged. If the LED indicator
"CHARGING" is lighted, the battery is in charging status.
3.
If the battery is cracked, deformed or leaks, do not attempt to use it. It has to be replaced.
IMPORTANT NOTE ON LEAD-ACID BATTERIES
1. PRIOR TO USING THE UNIT FOR THE FIRST TIME, PLEASE CHARGE FULLY THE BATTERY WITHOUT ANY INTERRUPTION.
2. CHARGE THE BATTERY REGULARLY AFTER EACH USE. DON'T WAIT UNTIL IT IS DISCHARGED!
3. DON'T ALLOW THE BATTERY TO DISCHARGE COMPLETELY! ONCE THE BATTERY IS FULLY DISCHARGED, THE CURRENT
DRAIN FOR RECHARGING WILL BE SO HIGH THAT IT WILL DAMAGE THE CHARGER AND/OR THE POWER SUPPLY OF THE UNIT.
4. IF YOU DON'T USE THE UNIT FOR A LONGER PERIOD OF TIME, PLEASE CHARGE THE BATTERY COMPLETELY AT 100% AND
CHECK/CHARGE IT ONCE PER MONTH OTHERWISE THE BATTERY WILL BE OUT OF USE.
THE LIFE TIME OF THE BATTERY DEPENDS ON THE OBSERVANCE OF THESE RECOMMENDATIONS.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGED BATTERIES FURTHER TO THE NON-OBSERVANCE OF THESE
BASIC RULES.
INSTRUCTIONS OF FRONT PANEL
1.
CD slot: the unit is fitted with an anti-shock laser that
draws the CD in automatically, so that you don’t need
a Close button. Just insert the CD with the label upside
gently into the slot and the player will draw the CD in.
2.
Remote control window
3.
Display
INSTRUCTIONS OF TOP PANEL
2
3
4
5
6
7
8
9
10 11
1
12
14
13
1.
MP3 input: This input has priority over the AUX input
on the rear panel. If a device is connected to this
input, the AUX inupt on the rear will be disabled.
2.
USB charging port: 5V/1A to charge a mobile phone
3.
Battery charge indicator. When it lights up, the
battery is fully charged.
4.
Volume control turn clockwise to increase the
volume, turn counterclockwise to decrease it.
5.
Standby button: Press to enter Standby, press again
to activate the speaker
6.
Input selection: Press to select AUX/BT/DISC/USB
input. When a CD disc or a USB stickis inserted, the
unit will switch automatically from any other input to
this input and play the music on the CD or USB.
7.
Press to select previous song.
In CD DISC Mode: Long press to fast rewind.
8.
Play/pause music.
9.
Press to select next song.
In DISC mode: Long press to fast forward
10.
Eject button for the CD player
11.
Press to mute the sound. Press again to cancel mute. Alternatively, you can also press the VOL+ or VOL-
button to cancel the MUTE function
12.
Press to switch the front LEDs on or off
13.
USB stick input for MP3 and WMA music files
14.
Battery charging indicator
