Use this slider to increase or decrease the speed of the track.
3.
GAIN
Adjust the CH1&CH2 level.
4.
2-BAND EQUALIZER
You can turn the 2-
band equalizer to adjust the Hi/Low frequency for master output.
5.
Master Volume
Turn this knob to adjust the Master output volume.
6.
Microphone Volume
You can turn this knob to control the Microphone volume.
7.
ECHO
Turn this knob to control the Echo of Microp
hone.
8.
TALKOVER switch
It turns the mic signal ON or OFF as well as enables the talkover setting.
9.
HEADPHONE MIX Control
Turn this knob to right for monitoring CUE on CH1, to left for monitoring CUE on CH2.
10.
CUE LEVEL
Turn to control the volume of the headphone signal.
11.
Channel Source selector
You can assign USB
, Line
-
input or Bluetooth as audio source to CH1/CH2 with this selector.
12.
Mic input (1/4” jack)
You can connect 6.3mm unbalanced microphone.
13.
AUX IN
You can connect an
MP3 player
, smartphone or any line level audio device.
14.
USB socket
You can connect your USB drive with music files to this socket for CH1/CH2.
15.
Bluetooth Pairing button
Press this button according to below instructions for different operation:
Short press 1 sec: Turn on Bluetooth and formerly paired device can be connected to unit, or unit will search for
new Bluetooth activated device for pairing.
Press/Hold 5 sec: Turn on Bluetooth and unit will enter
into “
Pairing Mode
”, a new device can be connected to
unit.
Press/Hold 10 sec: Turn off Blu
etooth and all connections will be lost.
16.
Headphone jack
Connect 1/4
” stereo headphone.
17.
LCD display (USB)
LCD display for MP3 player, all information (song title/remaining time/folder) will be displayed on LCD.
18.
PREVIOUS Track
Press this button to select previous track.
19.
NEXT Track
Press this button to select next track.
20.
PLAY/PAUSE
Press this button to control Play/Pause of MP3 playback.
21.
PITCH/SEARCH/SCRATCH Button
Press this button to switch the function of jog dial to PITCH/SEARCH/SCRATCH mode, when the indicator LED is
off, dial the jog for pitch bend function, when the indicator LED is on, rotate the jog wheel you enter the
scratch
mode, while the indicator LED is flashing, dial the jog for quick search forward and backward to navigate through
one track.
22.
DS
P/BRAKE
In
play mode, you push the brake button at first and then push play/pause button, the operation changes is
slowness from play to pause, push this button again to cancel this feature.
23.
DSP/REVERSE
Push the reverse button to play your track in reverse, push this button again to cancel this feature.
24.
JOG Wheel
In SEARCH mode the JOG Wheel can be used to search forward or backward in the music track, as well as for fine
adjustment to a CUE point in PAUSE mode. In PITCH mode
, the JOG Wheel will work as a PITCH allowing you
speed up (forward) or slow down (rewind) the music. In SCRATCH mode,
when the JOG Wheel is depressed and
rotated generates scratch-like effects.
