MANUAL - BOOMY
2
Code: 10-5579
MINI BLUETOOTH SPEAKER
OPERATING INSTRUCTIONS
In accordance with the requirements of UK standard
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To pre-
vent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to pro-
mote the sustainable reuse of material resources. To return your used device, please use the return and collection sys-
tems or contact the retailer where the product was purchased. They can take this product for environmentally safe
recycling.
For indoor use only
IMPORTANT NOTE FOR APPLIANCES CONTAINING LITHIUM-ION BATTERIES
PRIOR to using the unit for the first time, please charge fully the battery
Charge the battery regularly after each use. Don't wait until it is discharged!
DON'T allow the battery to discharge completely,
otherwise it will lose 20% of its capacity or even be totally damaged!
If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the
battery! If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/
charge it once per month.
The life time of the battery depends on the observance of these recommendations.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
We cannot be held responsible for damaged batteries further to the non-observance of these basic rules.
CONTENTS
• 1 Bluetooth speaker
• 1 USB Charging Cable (to charge the built-in battery)
• 1 instruction manual
• 1 pc 3.5mm jack lead
PRIOR TO FIRST USE:
Insert the small connector of the supplied charging cable into the USB-C charging port (11) on the front of the
speaker. Insert the large connector into the USB port on a computer, a USB charging device or a 5V USB adapt-
er (not included) and plug into a wall outlet.
The indicator (5) will turn RED while charging and turn off when fully charged.
LOCATION OF CONTROLS
1. ON/OFF: Long press to the speaker on or off. Press twice to disconnect BT
2. Previous Track / Decrease Volume
3. microSD input
4. Mode / TWS switch
5. LED indicator
6. AUX Jack
7. LED light switch
8. USB input
9. Next Track / Increase Volume
10. Play / Pause
11. Type-C Charging Port
BLUETOOTH OPERATION
Activate the Bluetooth function on your external Bluetooth device, start searching for Bluetooth devices and
select “BOOMY”. The indicator (5) will flash slowly in blue when the device is connected, and quickly when the
device is disconnected. Enter the password “0000” if required. After successful pairing, a tone will be heard.
AUX OPERATION
To use the speaker as a wired device, plug one connector of the 3.5mm audio cable into the 3.5mm AUX jack
(6) on the speaker. Plug the other connector into the headphone jack of your media-playing device. In this
mode, playback is controlled via the wired device.
USB OPERATION
Insert a USB device into the USB port (8) to play the music stored on the drive
MODE
1
2
3
4
5
6
7
8
9
10
11
