Ibiza Pro DJM10:4USB-REC, Инструкция по эксплуатации

Страница: 6 / 38

©Copyright Lotronic 2011 Page 6
23) Unbalanced Output
Master stereo program output provided by standard unbalanced phono sockets.
Level:
0dBu (775mV rms)
Output Impedance:
< 50 Ohms
Load Impedance:
5k Ohms (minimum)
24) Booth Output Fader Control
This slider controls the overall output level of the unbalanced Booth Output. The
program content of the Booth Output is the same as the ‘Master Output’.
25) Booth Unbalanced Output
Level:
0dBu (775mV rms)
Output Impedance:
< 50 Ohms
Load Impedance:
5k Ohms (minimum)
Auxiliary Channels
This AUX Send and return channel add the versatility of interfacing with the effects
units such as an Echo/Reverb processor for the microphone or sampler for the music
inputs.
26) Aux Send Output
The stereo AUX send program is provided via unbalanced phono sockets
Level:
0dBu (775mV rms)
Output Impedance:
< 50 Ohms
Load Impedance:
5k Ohms (minimum)
27) Aux Send Level
This rotary control sets the signal output level of the Aux send output.
28) Aux Select Switch
This switch sets the input onto the Aux send output. This can be either the ‘live’
microphone or the prefade signal or any of the four main music channels.
29) Aux Return Input
Standard stereo Phono sockets.
Input Impedance:
Typically 10k Ω
Source Impedance:
2k Ω (MAX)
Sensitivity:
-10dBu (195mV rms)
30) Aux Return Level
This rotary control has a gain range of < -70 to +10dB and controls the input signal
present on AUX return sockets being mixed onto the main output channels.
31) CUE Switch
This switch and indicator allows pre-fade listen on input signals of any of the 4 music
and AUX return inputs through the headphone and LED meters, (useful while setting
gains or trouble-shooting).
32) Monitor Pan Control
Varies the mix between the cued input and main L/R output, ideal for accurate beat
mixing. Full left will give cued input, full right will give main output program.
33) LED Monitor Display
Twin 10 segment LED ladders shows the signal level of whatever is present on
CUE/MONITOR bus, either PFL or output signals dependent on setting of monitor
PAN control (32).