ibis Hakkalugi, Заметки по настройке и обслуживанию

Страница: 16 / 23

30 31
Maintenance Maintenance
Working on your Mojo SL, SL-R, HD
The link assemblies on the Mojos
are designed to be easily removed
and replaced. Be sure to purchase
a fresh link set before removing the
old ones to skip any downtime. There
are no bearings to press out, nor any
axles to hammer. New Lopes Link
(upper) and lower pivot assemblies
are available in the buy section of
our website, or you can have your
dealer order them from Ibis for you.
Replacement is super simple and
requires these common tools:
• 2x 4mm Allen wrenches
• 2x 6mm Allen wrenches
• 2x 5mm Allen wrenches
• Loctite 242 blue thread locker or
anti–seize (depending on model
of bike)
Linkages
The upper and lower links for the HD
are more robust versions of the ones
used on the original Mojo and Mojo
SL. Please don’t try to mix and match
them. It looks like they might fit but they
are not interchangeable. Removal and
installation procedures are identical.
Please refer to the section on Mojo SL
and Mojo Carbon link maintenance in
this manual (PP 38–39.)
Bearing Replacement:
If you’re handy with a bench vice
and have a good supply of sockets,
you can attempt the replacement of
the bearings in the Lopes Link and
lower link yourself. While we don’t
have step–by–step instructions, you
are welcome to purchase the bear-
ings and try it yourself. New links with
bearings installed are available in
the Ibis webstore as well. The current
version of the Mojo SL lower link has
been extensively redesigned and
provides a 100% increase in torsional
stiffness along with a 7.5% increase
in lateral stiffness. You may want to
consider this upgrade rather than
replacing your bearings.
Bearing Specs:
Mojo, Mojo SL, SL-R Lower Link
• Front: 15 ID x 28 OD x 7 W
(Enduro P/N 6902 2RS)
• Rear: 10 ID x 22 OD x 6 W
(Enduro P/N 6900 2RS)
Mojo, Mojo SL, SL-R Upper Link
• 608 2RS 8 ID x 22 OD x 7 W
(Enduro P/N 608 2RS MAX)
Mojo HD Lower Link
• Front: 15 ID x 26 OD x 10 W
Dual Row Angular Contact
(Enduro DR 1526 RS)
• Rear: 15 ID x 28 OD x 7 W
(Enduro P/N 6902 2RS)
Mojo HD Upper Link
• 608 2RS 8 ID x 22 OD x 7 W
(Enduro P/N 608 2RS MAX)
You can find bearings used on the
Mojo here:
www.endurobearings.com/bicycle/
enduro_bearings.html on the
Enduro website. Here’s the direct
link to the Ibis Mojo/SL bearing kit:
www.enduroforkseals.com/id245.
html
The kit includes bearings for the
upper and lower links.